Modular conveyor systems
Each plant is different. The modular plastic chain conveyors of the Flextrac ™ series adapt to the curves and changes in elevation of your current plant with the flexibility of being easily reconfigured when changes occur.
Easily add, remove or reconfigure the conveyor.
The Flextrac ™ series is completely modular to fit your plant.
Why plastic chains rather than a regular belt?
They are the ones that add the possibility of making turn and elevation changes in a single conveyor.
It is a durable and economical solution because you can replace modular parts individually.
You have the choice between 9 different options.
Wheel bends use a free-spinning wheel to reduce friction.
It is a commonly used solution because it allows tighter turns.
Available for the following conveyor widths: 63mm (2.5in), 83mm (3.3in) et 140mm (5.5in).
Possible angles: 30º, 45º, 60º, 90º, 180º
Plain and vertical bends
For your regular turns, several options with wider angles are possible.
You can also avoid obstacles with vertical bends to raise or lower the system.
On conveyors where several of these curves are used, the total of all the angles cannot exceed 180 °.
Available with all available widths.
Horizontal angles: 30°, 45°, 60°, 90°
Vertical angles: 5°, 7°, 15°, 25°, 30°, 45°, 90°
To simplify integration, the conveyor frames feature an integrated T-slot.
They are used to fix the supports, accessories and guides.